Troubleshooting · 5 min read · DroneHub Team
Troubleshooting common errors
"Compass error": move away from rebar, cars and metal. Calibrate only when prompted, and never right next to your car.
"Weak GPS / ATTI mode": wait for satellites before taking off; in ATTI the drone will drift with wind — fly gently and land.
"Gimbal motor overload": gimbal clamp left on, bent damper plate, torn dampers or a damaged ribbon cable.
Video signal drops: keep antennas oriented broadside to the drone, avoid flying behind obstacles, and use 5.8 GHz in crowded 2.4 GHz areas.
FPV quad won't arm: check the Betaflight arming flags (angle, throttle, failsafe, no-gyro). The OSD or CLI status shows the reason.
General guidance only. Follow your aircraft manufacturer's instructions and verify regulations with official sources before flying.
Still stuck? Ask the community.Ask in c/beginners